Validation Manager-Inspector

Validation Manager-Inspector

The validation manager is used to define groups of validation tests.
The Validation Inspector is used as controller (Inspector) of the drawing.

15 January 2019
support
8
  Minutes read
Validation

Validation Manager
Validation Inspector


How to launch the Validation Manager

(Back to top)
There are 2 ways in Launching the Validation Manager.
  1. Open the Manager directly from C:\Program Files\hsbCAD\hsbdesign..\Utilities\hsbValidation\hsbValidationManager.exe’ folder.    
  2. Or type the command 'hsb_Validationmanager' in the command line in Autocad. 
Validation

Create new tests

(Back to top)
  • Create a new validation group by selecting the Add + 
  • Then dubble click the New group and give it a name to add checks to.
Validation
  • Select Add + on the right hand side in the Checks section.
  • When adding a test the user can choose from a list of available tests. Default we have 2 tests.
  • This list contains general validation tests, it is possible to have customer specific validation tests.
  • Adjust the available settings when needed.
validatione.g. default tests 

Validation
e.g. custom specific tests

Validation test settings

(Back to top)
If settings are present, they can be implemented in two different ways:
  1. A property grid, the available settings will appear in the Misc section, by selecting one of the tests of the current group.
Validation
2. Or a Custom UI, with multiple properties.

Saving the changes

(Back to top)
The created groups, with the configured tests, are automatically saved in the current hsbCompany\Validation folder.

Run Checks

(Back to top)
Before you start you need to make a Model file (hmm) of your drawing with the Exporter.
A validation group has to be selected, this group will run the enabled checks in that specific group on the model.
  • Open model.
  • Select an .hmm file
  • Run Checks.
  • A list with results will show the result.

Commands available in the Validation Manager

ack to Validation Manager) 
A short description of the available commands:

Validation
 

Validation Inspector

(Back to top)
The validation inspector is a tool to run a set of tests specified inside a validation group.
How to launch the Validation Inspector 
Run a validation group 
Validation results 
Commands available in the Validation Inspector
Processing test results 

How to launch the Validation Inspector

(Go back to Validation Inspector)
There are 2 ways in Launching the Validation Inspector.

  • Import the tsl hsb_ValidationInspector (Program Files\hsbcad\hsbcad20...\Content\General\TSL)
  • Launch true command 'hsb_Validationinspector'.

Run a validation group

(Go back to Validation Inspector)
A validation group has to be selected in the settings of the ‘hsb_ValidationInspector’.
Once that is done a set of entities has to be selected as input for the validation tests.

Validation

Validation results

(Go back to Validation Inspector) 
The validation inspector runs the test specified in the group on the selected entities.
The results are presented to the user.
Validation

Commands available in the Validation Inspector

(Go back to Validation Inspector) 
A short description of the available commands:

Validation

Processing test results

(Go back to Validation Inspector) 
The user can analyse the failed test results by clicking on a problem area in the validation inspector, e.g. ‘Beam (17)’. The problem area will be centered on your screen (using the current zoom-factor and UCS) and highlighted with a yellow dot.

Validation