Article segment single

hsb-ElementDefinition

This tsl creates a list in paperspace. This tsl uses a Catalog. Read more

hsb-ElementDefinitionCatalog

This tsl creates a catalogue for hsb-ElementDefinition. Read more

hsb-ElementDefinitionCatalogProps

This tsl is required for the hsb-ElementDefenitionCatalog Read more

hsb-ElementSection

This tsl creates a section from an element based on an existing hsbCAD viewport, that viewport contains the hsb-SectionManager. Read more

hsb-Insulation

This tsl inserts insulation data to the selected elements (empty space between beams) This tsl places Insulation between the studs of an element. Read more

hsbCAD_Electrical Circuit

This tsl creates an Electrical circuit in a Wall Element. Read more

hsbCAD_Electrical Fixture

This tsl creates Electrical fixture in a Wall Element. Read more

hsbElementBlocking

This tsl creates a distribution of blocking beams and stretches vertical and diagonal beams accordingly. Read more

16 December 2019

joanne.simpson

Minutes read

hsbElementInsulation

This tsl places insulation between the studs of an element. You can set the thickness of the insulation. Read more

hsb_Apply Glue to Elements

This tsl creates glue lines in 10 zones for walls and floors, and attaches information for export. Read more

hsb_Apply Naillines to Elements

This tsl creates nail lines in 10 zones for StickFrame walls and attaches information for export. Read more

hsb_CreateBoardsBetweenStuds

This tsl creates sheeting boards with 2 batters to support them. They are created between studs and flush to zone 6. Read more

hsb_CreateElement

This tsl creates a floor element around the selected beams and assign it to the current group. Read more

hsb_CreateHeadbinder

This tsl creates headbinder on the selected elements and clean the connections. The headbinder can get attach to a loose group or to the element under need. Read more

hsb_CreateMidHeightBlocking

This tsl places blockings on 1 height of an element. Read more

hsb_CreateMultipleHeightBlocking

This tsl places blockings on multiple heights of an element. Read more

hsb_CreateSoleplate

This tsl This tsl Creates a sole plate under Wall / CLT Elements. Read more

hsb_DrawMultiElement

Still to describe and place a picture Read more

hsb_DrawXonWindow

This tsl draws and X on the opening that have a point load over them. Read more

hsb_E-AngleIron

This tsl places an angled Iron at the t-connection of the two selected beams. Read more

hsb_E-AssignPropsJoistandRafters

This tsl assigns extra information to Joist and Rafters in an element. Read more

hsb_E-BeamToBlocking

This tsl creates a blocking when you have drawn a full length beam over an element. The beam is split. Read more

hsb_E-BeamToSheet

This tsl converts a beam to a sheet. This tsl uses a Catalogue. Read more

hsb_E-ChangeSheetSize

This tsl swaps the height/width/length of a sheet to the correct values. Read more

hsb_E-ChangeZoneIndex

This tsl changes the zone where entities are assigned to. Read more

hsb_E-ChangeZoneIndex-SIPS

This tsl changes SIP's zone from selected element(s) (Meant to be used on debug) Read more

hsb_E-CheckMaximumAllowedSpacing

This tsl checks the spacing between vertical beams and can add beams/ color beams that exceed the allowed spacing. Read more

hsb_E-ColorBeams

This tsl is used to convert beams to a different color. This tsl uses a Catalogue. This functionality is also available in DSP since hsbcad 2015. Read more

hsb_E-Combination

This tsl combines 2 Roof elements into 1 new element and visualizes this into a MultiRoof element. Read more

hsb_E-CompoundToSingleCut

This tsl makes a single cut from a double cut. Only in Roof elements. Read more

hsb_E-ConvertToDummyBeams

This tsl sets the beam codes of the beams to convert to a dummy beams. Read more

hsb_E-CreateModule

Page under construction and insert a picture Read more

hsb_E-CutPerpendicular

This tsl Single/ double cuts on beams are given a straight cut on the shortest point. This functionality is also available in DSP since hsbcad 2015. Only in Roof elements. Read more

hsb_E-DetailName

This tsl creates a cataloque for hsb_E-InsertDetailNames. Only in Roof elements. Read more

hsb_E-DistributeSheeting

This tsl draws and distributes sheeting in a specified area. Read more

hsb_E-DrawZone

This tsl draws an outline of a specific zone in paper space. You could also add hatching to it. Read more

hsb_E-DuplicateBeamsBehindSheet

This TSL duplicates beams with beam code. Read more

hsb_E-EdgeDetails

Page under construction and insert a picture Read more

This tsl Places edge information of a Roof/Floor Element at a given position. Catalog for this tsl can be set from DSP; argument to pass should be "DspToTsl; <catalog name>". If the catalog name is set to e.g. "VAR57", it used variable 57 to get the catalog name. The detail name can be resolved from the variable names of roof elements. @(VAR60) will replace the detail name with ... Read more

hsb_E-ElementDrill

This tsl creates element drills in a specific zone. Read more

hsb_E-ElementLinker

Links elements as subelement to main element. Read more

hsb_E-ElementTable

This tsl adds a list with info of the selected elements. Read more

hsb_E-ExtendBeam

This tsl extends specified beams with a given length. It integrates the beams in the connecting Element. Read more

hsb_E-FacadeNailing

This tsl adds nail-clusters to the element. The nail clusters are attached to a zone index. The areas are specified by a polyline. The tsl is dependent on this polyline. This means that if the polyline changes the tsl is recalculated. Read more

hsb_E-GridTooling

This tsl Read more

hsb_E-Identification & Marking

This tsl labels the beams of the element (optional) and adds marking and identification on beams for cnc export. Read more

hsb_E-InsertDetailNames

This tsl inserts a rectangle with a detailname to the edges of a floor/roofelement with a cataloque from hsb_E-DetailName getting V60 from the element description. Read more

hsb_E-InsertInsulation

This tsl inserts insulation data to the selected elements (empty space between beams) Read more

hsb_E-InstallationPoint

This tsl will add Electricity, gas or water symbols to an Element. Read more

hsb_E-InstallationTube

This tsl will add a tube or a line where the tube needs to come on an Element. Specify a path where the tube has to be added, it will automatically cut out beams. Read more

hsb_E-Insulation

This tsl inserts insulation data to the selected elements (empty space between beams) Read more

hsb_E-IntegratedTooling

This tsl joins two intersecting beams. Read more

hsb_E-IntegrateSteelbeam

This tsl integrates a steelbeam in the topplate of an element. Read more

hsb_E-IntegrateTimbers

This tsl integrates the beams in the connecting beams in an Wall Element. Read more

hsb_E-Ladder

This tsl places a ladder between 2 beams. Read more

hsb_E-LinePattern

This tsl inserts a line pattern on a specified zone. Read more

HSB_E-MachineDatum

hsb_E-Markerlines

This tsl placed markerlines on the selected zone. The tsl adds lines at the start and the end of the studs/rafters/joists The length of the markerlines can be specified in the properties. Read more

hsb_E-MarkerlinesVerticalBeams

This tsl creates marker lines on vertical beams. Read more

hsb_E-MarkSheetEdges

This tsl marks sheeting edges over beams. Read more

hsb_E-NailClusters

This tsl creates nail clusters to nail one zone on anther zone. The nail clusters are centered, with the specified offsets, in the intersecting areas between the 2 zones. Read more

hsb_E-Naillines

This tsl applies a naillines to a zone you select. Read more

hsb_E-NumberModules

This tsl numbers modules (opening). The modules are numbered per element. Read more

hsb_E-OpeningBlock

Page under construction and insert a picture. Read more

hsb_E-ProfilingBeamCut

This tsl mills a profile in the beams of an element. Read more

hsb_E-RecalculateSheetOrientation

This tsl swaps the UCS of an object or Entity, height/width/length of a sheet will be corrected to the correct values. Only for Roof Elements. Read more

hsb_E-ReferenceDrill

This tsl inserts drills as a reference position. The drills are placed along a vertical and/or horizontal line. This lines are offsetted from the elements origin and can be moved with a grippoint afterwards. The drills are placed in the center of the beams. Read more

hsb_E-RemoveModuleData

Page under construction and insert a picture. Read more

hsb_E-Replica

Page under construction and insert a picture. Read more

hsb_E-Replicator

This tsl Replicates elements, child elements are depending on a master element to visualize entities. This is the main Tsl that is used to create replicated elements. Read more

hsb_E-ResetZoneOutlines

This tsl tries to restore the Element outline. This tsl resets the zone outline to the outline of zone 0. Read more

hsb_E-RunElementTsls

This tsl can run multiple tsls. This can be configured in a .xml file in hsbCompany\TSL\Setting folder. Read more

hsb_E-Saw and MillLines

This tsl placed saw and mill lines to selected zone of an Element. Line segments connected to an internal corner are done with a mill. Other line segments are process with a saw. Read more

hsb_E-SetBeamWidthAtSheetJoint

This tsl makes it possible to enlarge the beams on sheet joint. Only for Roof Elements. Read more

hsb_E-SetDirection

This tsl sets the main direction of the element to the direction of the rafters. The tsl makes it possible to change the UCS of a roof element. Read more

hsb_E-SetDrillVisualizationType

This tsl visualizes the tsl ''CNC_DrillElement" in an Element. Only for Roof Elements. Read more

HSB_E-SetGrainDirection

This tsl .... Read more

hsb_E-SetZone

Page under construction and insert a picture. Read more

hsb_E-SheetingRenameAngledPieces

This tsl renames angled sheeting. (Page under construction and insert a picture) Read more

hsb_E-ShowModule

This tsl allows you to assign and add/remove module data from genbeams. (Page under construction and insert a picture) Read more

hsb_E-SplitSheetOnZoneMaterial

This tsl creates insulation objects in the frame. (Page under construction and insert a picture) Read more

hsb_E-SquaredMill

This tsl makes a milling square on the shortest point of the beam where the milling is applied. Read more

hsb_E-StretchToBeam

This tsl stretches a beam to a given Beamcode or Beamtype. Read more

hsb_E-SubElement Visualizer

This tsl visualizes sub-elements in the layout of the main element. Also see hsb_E-ElementLinker. (Page under construction and insert a picture) Read more

hsb_E-ToolPath

This tsl adds a cnc tool to a specific zone. Read more

hsb_E-ZoneProfiles

This tsl adds grippoints to zone profile to manipulate them. (Page under construction and insert a picture) Read more

hsb_Element Code

This tsl displays the element subtype in model. Read more

hsb_ElementComponentsTable

Still to describe and place a picture Read more

hsb_FrameNail

Still to describe and place a picture Read more

hsb_FrameNailing

This tsl places nails in the studs/Joist. This is the master tsl. It inserts a satelite tsl for each nailing position. This nailing position is outputted to the dxa file with a specific index. Depending on the index there might be more than one nail applied. Read more