Element TSL

This tsl creates a cataloque for hsb_E-InsertDetailNames. Only in Roof elements.

Links elements as subelement to main element.

This tsl draws an outline of a specific zone in paper space. You could also add hatching to it.

This tsl creates element drills in a specific zone.

This TSL duplicates beams with beam code.

This tsl makes a single cut from a double cut. Only in Roof elements.

This tsl Single/ double cuts on beams are given a straight cut on the shortest point. This functionality is also available in DSP since hsbcad 2015.

This tsl draws and distributes sheeting in a specified area.

This tsl sets the beam codes of the beams to convert to a dummy beams.

This tsl is used to convert beams to a different color. This tsl uses a Catalogue.

This tsl combines 2 Roof elements into 1 new element and visualizes this into a MultiRoof element.

This tsl checks the spacing between vertical beams and can add beams/ color beams that exceed the allowed spacing.

This tsl creates a blocking when you have drawn a full length beam over an element. The beam is split.

This tsl converts a beam to a sheet. This tsl uses a Catalogue.

This tsl changes SIP's zone from selected element(s) (Meant to be used on debug).