Wand TSL

This tsl draws a table in model with information from the panel and export it to Excel.

This tsl creates a table of Wall Number,Description,Height,Length,Max Weight, Area for Stickframe walls in the modelspace.

This tsl creates fillet timbers between open angled Stickframe walls and assigns the fillets to their respective elements.

This tsl creates a Bill Of Material in the Layout for Stickframe Walls in predefined groups.

This tsl creates T-connections between two different Walls. U-Shape / L-Shape and multiple studs.

This tsl displays the Wall Element area on a selected place in the drawing.

This tsl marks stud position on a specified zone of elements.

This tsl creates lifting for a single beam.

This tsl places splits to the headbinder, the top- and the bottomplate. Splitted beams are labelled from left to right A, B,.

This tsl creates a sanitary object.

This tsl adds a service hatch (opening) to wall elements. Default locations are next to opening and at wall connections.

This tsl replaced the header beam with a predefined profile that is saved in your profile drawing.

This tsl shows opening position in outline.

This tsl creates a post (Extrusion profile) in an Element with the plates in certain zone.