Generic filters

Revit®| T-Drill

Connects two Structural Members with a T-Drill connection.


To apply the tool, Select the Structural Member(s) to be considered as the male joist(s).
Press the Enter key to apply the selection.
Select the Structural Member to be considered as the female joist(s).
Press the Enter Key to finish, otherwise, repeat the selection process.
Multiple T-Drill joints can be applied to the same female structural element, by selecting multiple male Structural Member(s).
Select the magenta colored handler to parameterize the properties of the tool or create customized types.


If you change the position of the Male or Female Structural Member, the Tool will still function.

Type Parameter


A= hsbcad Barrel Diameter
B= hsbcad Drill Hole Diameter
C= hsbcad Extra Depth From Drill Axis
D= hsbcad Offset
E= hsbcad Switch Surface
F= hsbcad Sink Holes Depth
G= hsbcad Sink Holes Diameter
H= hsbcad Offset Socket
I= hsbcad Socket Length
J= hsbcad Box
K=hsbcad Switch Surface 
R=hsbcad Radius
Updated on 23/09/2021

Was this article helpful?

Related Articles

Need Support?
Can’t find the answer you’re looking for? Don’t worry we’re here to help!
Contact Support