Roof TSL

This document will show you how to calculating the wood percentage / TimberPercentage with the hsb_E-TimberPercentage tsl for determining the RC value of elements for the BENG - NTA 8800.

The hsb_E-Replicator tsl can be used to copy entities from 1 main element to multiple replica elements. When having this, the HSB_G-ReplicatorExport tsl can create a delivery and export a delivery by running the hsbExporter.

This tsl creates a connector of type BeA HVV Type 1.

This TSL creates SIHGA PICK lifting devices in Roof/Floor Elements, referring to the center of gravity.

This tsl adds a tube to a roof element. The insertion point of the tube will be projected to the specified reference position.

This tsl stretches the tilelath under and over an opening to the closest rafters (left & right).

This tsl optimizes counter battens. The dimensions of angled battens are corrected.

This tsl adds lifting points to roof elements.

This tsl creates sloped battens on a flat roof.

This tsl adds blocking to the top-trimmer of an opening in a roof element.

This tsl angles sheets from a certain distribution point on a specified angle for the creation of a gutter in a flat roof.

This tsl splits in a dsp detailed beam and creates extra timber as an extension of the rafters.

This tsl creates an angled flat roof adding Laths and sheeting in zone 1 and 2 under the specified angle.

This tsl creates a hip connection. The hip of the lower elements is extended over the upper elements.

This tsl changes the connection between hip and ridge.