How to draw a Roofline by Polyline (Video)

This document will show you how to set you hsbWall Roof and Floor height by selecting a polyline.

How to modify the top of your hsbWall

• When you draw a hsbWall you need to put a ''_'' in the Cutting plane*(CP)

• Select a hsbWall, right click and select Roof/Floor Line - Modify Roof Line.
• Enter ''P'' (Project to polyline) in the command line

• Select the Polyline you have drawn.

How to modify the bottom of your hsbWall

BLOCK_CHECK_START

When you draw a hsbWall you need to put a ''_'' in the Cutting plane*(CP) in the Wall definition dialog box

BLOCK__END

• Select a hsbWall, right click and select Roof/Floor Line - Modify Floor Line.
• Enter ''P'' (Project to polyline) in the command line

• Select the Polyline you have drawn.