hsb_G-DistributionPoint

This is a combination tsl, the tsl makes use of the hsb_W-DistributeHorizontalSheeting.
This tsl will set the sheeting to a certain height.

Location:

This tsl is saved in your C:\Program Files\hsbcad\<hsbcad20…>\Content\Dutch\TSL

Insert: Manually insert

BLOCK_INFO_START

This tsl has to be added in Model space.

BLOCK__END

Remarks:

The distribution point needs to be attached to the Element group.

BLOCK_CHECK_START

Note: The sheeting zone has to have horizontal lap siding defined in the Wall.
If you don't define the distribution zone the values will be taken defined in the wall.

BLOCK__END