hsbCLT-Chamfer

This tsl defines a polyline based tool for chamfers.
The insertion Mode is Circumference (A1), by opening (A2), both(A3), by direction(A4), by polyline (A5), by path(A6).
It allows you to choose the alignment, reference side (B1), opposite side (B2), or both (B3).

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Insert: Manually insert

BLOCK_INFO_START

This tsl has to be added in Model space.
If needed, first draw a polyline on the panel.

BLOCK__END