hsbCLT-JointBoard

This tsl defines a joint board connection on one common edge between at least two panels.
On insert it may create a split if only one panel was selected.

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Insert: Manually insert

BLOCK_INFO_START

This tsl has to be added in Model space.
Select a set of panels.
The tsl will create multiple joint boards for any two collinear edges of two panels. (or points) lying in the same straight line.
The selected surface needs to be coplanar (In the same plane).
The tool is dependent from the Joint Board (the beam which is created).

BLOCK__END