hsbLogPurlinConnection

Connects a purlin or any other beam with the beams of a log wall.
This tsl creates three different tooling's which will be applied automatically.
- A squared section will have the milling's squared.
- A trapezoid section will have a trapezoid milling.
The non perpendicular edges of the trapezoid will be processed as a free profile and will require manual trimming before mounting.
- A polygonal shape (i.e. pentagon shape as on some ridge plates) will be milled squared.
* each side of milling depth can be controlled via OPM as well as the gaps on each side.
* the shape is taken from the shadow of the beam in its X-axis.

Insert: Manually insert

BLOCK_INFO_START

This tsl has to be added in Model space.
Select one beam which you like to connect to a log wall.

BLOCK__END