Brauchen Sie Hilfe?

Sie können die gesuchte Antwort nicht finden? Keine Sorge, wir sind hier, um zu helfen!

Revit® | Plugins in the Framing style editor

This document will explain the different plugins we have in the Revit® Framing style editor.

List of all the Plugins for the Revit® Framing style editor.

Add tools from beam extrusion profile	Add tools from beam extrusion profile.
Adjust beam section	Adjust the beam section to match one of a predefined set of sections. For a matching width the height is adjusted.
Adjust Element Tool Depth	Applies an adjustment to the depth of element milling and drilling tools.
Adjust milling in Weinmann W12 File	Adjust the milling in Weinmann W12 File when the width is close to the predefined width.
Align Beams	Beams get aligned, to be position on the machine by specifying their orientation in the exporter. E.g. PosZ/PosX
Align Beams with Element	Will change beam coordinate system to keep beam orientation consistency in an element.
Apply Contour CNC Lines	Applies saw or milling lines on the grip-based contour of the specified zones.
Apply Saw/Mill Lines	Applies saw or mill operations at the edges of the specified zones.
Apply Service Holes	Apply a service hole to the center of the vertical beams.
Attach Beams to Walls	Attach entities (family elements) to a wall through an entity container (families container).
Beam or Sheet Analyse Filter	Filters beams or sheets based on the Analyse.
Beam Filter	Allows Beams to included or excluded from the project.
Beam has Tools	Filters beams if there are any other tools than two straight end cuts added to the beam.
Beam Straight	Made all beams straight, selection of beams is based on beamcodes.
Beam to fixed length	Optimized beam to a given length.
Beam Tool Filter	Filters beams based on their tools.
Break Nail Lines Using No Nail Areas	Break nail lines based on no nail areas.
Change SawLine Depth	Set a new depth for Element saw lines within a certain length range and a certain depth range.
Combine Collinear Naillines	Will join nailine that are collinear.
Combine Plates	Combines all plates into a single beam. To combine only the actual top and bottom plates use the Join Plates extension.
Convert Angle Nailines to Short Straight Segements	Will create short naillines where nailines are at an angle.
Convert Beams into Sheets	Convert beams into sheets.
Convert Sawlines into Milling Lines	Converts element Sawlines from a specific zone into Milling lines.
Convert Sheets into Beams	Convert Sheets into beams.
Create Modules	Creates new modules of touching beams or adds touching beams to existent modules. Plates and blockings are excluded.
Create Pocket	Creates a pocket around a structural member.
Create Sheathing Contours For Element	Applies saw or milling lines on the grip based contour of the specified zones.
Create Sheet	Creates a sheet in the specified zone. The outline of the frame is used as the shape.
Create Simple Sheathing Contours For Element	Applies milling lines on the grip based contour of the specified zone.
Cut Element Beams In Negative X	Will cut beams that are all or in part in negative x of the element origine.
Element nailing	Creates nail lines for an element.
Element Sheathing Simplifier	Will simplify sheathing for easier interpretation by a machine making the rectangular and justified to an edge.
Entity Query Filter	Allows entities from different types to be included or excluded from the project.
Even nail line spacing	Evens the spacing for nail lines containing two points.
Even nail line spacing	Evens the spacing for nail lines containing two points.
Extend Plates	Extends plates to the extents of the framework of an element.
Extend Tilelaths	Extending tilelaths to element width for Weinmann tilelath module. Nailclusters are also grouped per tilelath.
Filter GenBeam Drills	Filter Beam/Sheet/Sip/Clt tools of type AnalysedDrill.
Filter Round Sheet Openings	Filter sheet openings that are a cirle.
GroupExtension	Run a group of one or more export extension.
Integrate tools into Sheet Outline	Perpendicular Beam/Cuts, Drills and FreeProfiles are integrated into the sheet outline and openings.
Join Plates	Joins top and bottom plates of multiwalls.
Make Element Rectangular	This will stretch beams to make the element rectangular.
MEP Tooling	This will create the tooling for MEP items in the model.
Make Element Rectangular	This will stretch beams to make the element rectangular.
Merge Overlapping Nail Lines	Straight nail lines of which parts overlap are merged. Nail lines with different tool index or zone do not get merged.
Mirror Elements	Mirror the elements in the model.
Notch Plates	Stretch Beams that Intersect Top And Bottom Plates and add a Notch.
Offset nail lines per zone	Offsets nail lines per zone by a certain distance to avoid nail conflicts.
Optimise Sheeting	Optimise sheeting per element and create new sheets if necessary or remove them if they can reuse from another sheet..
Optimise Tilelaths	Optimise tilelaths per element shape and create new same length tileLaths.
Optimize Nailline Spacing	Will evenly space nails for the length of the line.
Pad Stick Frame Sheathing Overhangs	Pads out with a stud and plates any sheahting overhang.
Pad Stick Frame Wall	Pads out with studs a stick frame wall to a specified length.
Plate Split	Splits plates
PlateIdentity	Identifies Top and Bottom Plates.
Property Mapper	Maps external Properties to Hsb Object Properties
Remove Beam Tools	Removes the specified beam tools.
Remove beams and stretch studs	Remove beams and stretch the touching studs by the thickness of the removed beam.
Remove Module Information	Clears the module information from the beam.
Rename Modules	Renames modules in a wall.
Rvt – Fix Stacked Openings	POC.
Set Beam Size Convention	Set the width to be the smallest of all the sizes from the beam.
Set Nail Tool Index	Sets the tool index for nail lines on a specified zone. Specifying the from tool index as -1 will change all nail tool indexes on the specified zone.
Set Preferred Drill Direction	Will change drill direction if not alligned with preffered enter dicetion.
Set Range Element Drills	Element drills can be adjusted by the given range in element Y direction
Set Range Element Toollines	Element tool lines (saw, mill, nail) can be adjusted by the given range in element Y direction
Set Sheet Stock Size	This will increase the size of the sheet to the size specified.
SetSheetUcsConvension	TAnalyse the view direction of sheet against the element Zone or if you used the TSL-Hsb_T-GrainDirection and set the Z direction accordingly.
Sheet Filter	Allows sheets to be included or excluded from the project.
Sheet set vecX direction	Set vecX direction of sheets aligned to an element zone.
Sheet Tolerance	A small Extension to round the width and Length to a full given dimension based on a tolerance.
Shorten Beams that Intersect Plates	Shorten Beams that Intersect Top And Bottom Plates From Element.
Shorten Horizontal Beam Vertical Cut	For horizontal beams only. The vertical cuts are moved back the given distance.
Shorten Tagged Beam	The AnalysedCuts are moved back the given distance from both ends of the beam.
Slice beam along axis	Slice beams along its axis reducing its width to the given width, if the beam is tagged correctly, and if the width is a multiple of the specified width.
Tag Beam Groups	Tags groups of beams. Criteria for a group of beams can be set in the settings.
Tag Entity by Format Lookup	Will find an entity from a format lookup and tag the entity.
Tag GenBeams in Zones	Tags GenBeams in a zone depending on their position in the zone according to zone profiles e.g. inside, outside
Tag Sheets with element tools	Tags sheets that element tools are applied to.
Tag Value Containers	Tag specific MapX as value container. This makes the content of the MapX available as Item Values.
Trim Header	This will trim the Header to fit under the top plate.
Validation	This will trim the Header to fit under the top plate.
Zone Filter	TAllows sheeting zones to be filtered out.

plugin,plugins,Plugins in the Framing style editor

Sprung zum Abschnitt

Revit® | Plugins in the Framing style editor

List of all the Plugins for the Revit® Framing style editor.