Element TSL

This tsl changes the zone where entities are assigned to.

This tsl places an angled Iron at the t-connection of the two selected beams.

This tsl This tsl Creates a sole plate under Wall / CLT Elements.

This tsl places blockings on multiple heights of an element.

This tsl assigns extra information to Joist and Rafters in an element.

This tsl draws an X on the opening that has a point load over them.

This tsl places blockings on 1 height of an element.

This tsl creates headbinder on the selected elements and clean the connections. The headbinder can get attach to a loose group or to the element under need.

This tsl creates a floor element around the selected beams and assign it to the current group.

This tsl creates sheeting boards with 2 batters to support them. They are created between studs and flush to zone 6.

This tsl creates nail lines in 10 zones for StickFrame walls and attaches information for export.

This tsl places insulation between the studs of an element. You can set the thickness of the insulation.

This tsl creates a distribution of blocking beams and stretches vertical and diagonal beams accordingly.

This tsl creates glue lines in 10 zones for walls and floors, and attaches information for export.

This tsl creates Electrical fixture in a Wall Element.