This document will show you how to set you hsbWall Roof and Floor height by selecting a polyline.
How to modify the top of your hsbWall
- When you draw a hsbWall you need to put a ”_” in the Cutting plane*(CP)

- Select a hsbWall, right click and select Roof/Floor Line – Modify Roof Line.
- Enter ”P” (Project to polyline) in the command line

- Select the Polyline you have drawn.


How to modify the bottom of your hsbWall
- Select a hsbWall, right click and select Roof/Floor Line – Modify Floor Line.
- Enter ”P” (Project to polyline) in the command line

- Select the Polyline you have drawn.

