hsbCLTJointBoard

This tsl creates a joint board between 2 panels and determine the placement of the board.

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Insert: Manually insert

BLOCK_INFO_START

This tsl has to be added in Model space.
Select a set of panels.
The tsl will create multiple joint boards for any two collinear edges of two panels. (or points) lying in the same straight line.
The selected surface needs to be coplanar (In the same plane).
The tool is dependent from the Joint Board (the beam which is created).

BLOCK__END