hsbMake | Configuring client

To configure a client the client application needs to be started in configuration mode. To start the client in configuration mode hold down Shift and Ctrl button then double click the client icon.

Opening the client in configuration mode

When the client is started in configuration mode the top bar with the following actions is visible.

Open	Open a client .pcc* file (An existing client configuration).
Save	Save a client .pcc file.
Import Config	Import a client .pcc configuration.
Options	Options for the client configuration.
Client settings	Edit the selected/active client application.
Applications	Manage the applications in this client.

BLOCK_INFO_START

*.pcc file stands for hsbPC Client. This file contains the settings specific for a client, normally for different products (roof, wall, floor etc.) there are different .pcc files. After setting up the client you can save the .pcc file and load it on another system.

BLOCK__END

Client applications

Every client can consist different applications, each production step can have its own application/view. There are many applications available, most common to use are the ElementView and PDF viewer applications.

Configuring client,hsbmake

Need Support?

Can’t find the answer you’re looking for? Don’t worry we’re here to help!

 Contact support

Jump to section

hsbMake | Configuring client

Client applications