hsbTimber

Adds a cut to structural member(s). The cutting plane can be defined with a model line.

Adds a Slot opening to structural member(s). You can select any point on a face to place the Slot.

Creates a circular shaped opening on a single structural member. You can select any point on a face to place the drill.

Adds a Convex or Concave profile to the front or rear face of an structural member.

Creates a circular shaped opening on an individual or multiple structural member(s).

Adds a chamfer to the front or rear face of structural member's edge(s).

Stretches a beam against another beam. Extends a structural element(s) to a boundary formed by another structural element.

Connect two Structural Members with a Tenon on the Male Structural Member and a Mortise on the Female Structural Member.

Create notches or trims on structural element(s) using the boundary profile from a selected structural element.

Creates a rectangular shaped opening, cutting trough intervening walls, floors, roofs, structural members and columns. You can cut a structural member with either an existing model line or draw a new model line.

Creates an Arc shaped opening on structural members(s). You can select any point on a face to place the Arc.

Connect two Structural Members with a HousedTenon on the Male Structural Member and a Housed Mortise on the female Structural Member.

Connects two Structural Members with a Scarf Joint.

Adds a Half Lap joint between two structural members.