TSL | hsbCenterOfGravity

This tsl calculates the center of gravity of any hsbcad item, element or assembly.
This tsl works in combination with various tsls such as the hsb_G-Information and the hsb_W-Lifting .
Place the hsbCenterOfGravity tsl first.

Location:

These are saved in your C:\Program Files\hsbcad\hsbcad20....>\Content\General\TSL.

Insert: Manual insert

BLOCK_INFO_START

This tsl can be added in Model space or in Paper space.
Model space: select a set of entities.
Paper space: press enter, then select a view port and a insertion point outside of your paperspace.

BLOCK__END

Other interesting documents

hsbMaterials: Materials in hsbcad can have different densities.

hsbCenterOfGravity: This tsl calculates the center of gravity of any hsbcad item, element or assembly.

hsbCAD_Show Frame Weight: This tsl will show the frame and total weight of an Element.

hsb_ShowElementWeight: This tsl exports Element Item with information of the stickframe weight to the database.

hsb_AssignOpeningWeight: This tsl assigns the weight to the windows and doors, based on the type of glass and also the timber and their area.

How to export the element weight in Excel: This video is about exporting the Element weight in Excel.

Other interesting documents

We also have the following lifting tsl's:

hsb_R-Lifting: This tsl adds lifting points to the elements.

hsb_F-Lifting: This tsl adds a grid of lifting positions to a floor element.

hsb_W-Lifting: This is a combination tsl, the tsl makes use of the tsl hsbCenterOfGravity.

hsb_W-SingleLifting: This tsl creates lifting for a single beam.

Sihga PICK Element: This TSL creates SIHGA PICK lifting devices in Roof/Floor Elements, referring to the center of gravity.

Sihga PICK Wall: This TSL creates SIHGA PICK lifting devices in Stickframe Walls, referring to it’s center of gravity.

hsbCLT-Lifter: This tsl will create drills for the lifting device.
hsbCLT-Lift:  This tsl will create drills for the lifting device.

hsbPanelLiftingDevice:  This tsl creates a drill distribution along X-Direction of a genbeam, optional one can connect additional genbeams with it.