Back to top

TSL | hsbCLT-Lift

This tsl will create drills for the lifting device.

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\General\TSL

Insert: Manually insert

This tsl has to be added in Model space.
Select the CLT panels, the drills will be automatically placed according to what you've fill in the dialog box.

Remarks

We also have the following lifting tsl's:

hsb_R-Lifting: This tsl adds lifting points to the elements.

hsb_F-Lifting: This tsl adds a grid of lifting positions to a floor element.

hsb_W-Lifting: This is a combination tsl, the tsl makes use of the tsl hsbCenterOfGravity.

hsb_W-SingleLifting: This tsl creates lifting for a single beam.

Sihga PICK Element: This TSL creates SIHGA PICK lifting devices in Roof/Floor Elements, referring to the center of gravity.

Sihga PICK Wall: This TSL creates SIHGA PICK lifting devices in Stickframe Walls, referring to it’s center of gravity.

hsbCLT-Lifter: This tsl will create drills for the lifting device.
hsbCLT-Lift: This tsl will create drills for the lifting device.

hsbPanelLiftingDevice: This tsl creates a drill distribution along X-Direction of a genbeam, optional one can connect additional genbeams with it.

hsbCLT,hsbCLT-Lift,tsl
Need Support?

Can’t find the answer you’re looking for? Don’t worry we’re here to help!

Contact support
Made in Webflow