hsbPanelLiftingDevice

This tsl creates a drill distribution along X-Direction of a genbeam, optional one can connect additional genbeams with it.
This tsl calculates the required lifting system depending from the given parameters, the panel weight and it's point of gravity.

One can release the lifting device collection into individual devices.
Released devices are not sensitive to the point of gravity!

Location:

This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\ DACH\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\Content\IT\Tsl
This tsl is saved in your C:\Program Files\hsbCAD\<hsbcad20...>\UK\TSL\Standard\CLT

Insert: Manually insert

BLOCK_INFO_START

This tsl has to be added in Model space.

BLOCK__END

Remarks

We also have the following lifting tsl's:

hsb_R-Lifting: This tsl adds lifting points to the elements.

hsb_F-Lifting: This tsl adds a grid of lifting positions to a floor element.

hsb_W-Lifting: This is a combination tsl, the tsl makes use of the tsl hsbCenterOfGravity.

hsb_W-SingleLifting: This tsl creates lifting for a single beam.

Sihga PICK Element: This TSL creates SIHGA PICK lifting devices in Roof/Floor Elements, referring to the center of gravity.

Sihga PICK Wall: This TSL creates SIHGA PICK lifting devices in Stickframe Walls, referring to it’s center of gravity.

hsbCLT-Lifter: This tsl will create drills for the lifting device.
hsbCLT-Lift: This tsl will create drills for the lifting device.

hsbPanelLiftingDevice: This tsl creates a drill distribution along X-Direction of a genbeam, optional one can connect additional genbeams with it.